Solaracks aluminium clamp assembly mounted on a square membrane base.

A solar mounting enquiry for a membrane roof begins at the roof interface. The membrane, insulation and supporting construction all need to be understood before a mount is selected.

Solaracks' TPO/PVC range provides three distinct options: a heavy-duty penetration mount, a compact mini penetration mount and a welded clamp-type mount. The first two connect through the roof assembly; the third uses a membrane base welded to the roof surface.

Two cylinder-based mounts

The heavy-duty and mini versions share a supporting-cylinder arrangement with a thermal-break screw and nut connection. A TPO or PVC membrane skirt forms part of the roof interface, with a secondary waterproofing film included in the detail.

The two versions use different base and skirt footprints. Comparing them starts with the proposed equipment arrangement and the roof build-up, including the supporting construction beneath the membrane. A smaller footprint alone does not determine which mount fits the project.

For these penetration mounts, the structural fixing and membrane detail need to be reviewed together. Show both in the project information so that the mounting and roofing teams are working from the same interface.

A welded membrane base with an aluminium clamp

The third option combines a TPO/PVC membrane base with an aluminium-alloy clamp. The base attaches to the membrane surface by hot-melt welding, providing the non-penetrating option within this range. The clamp forms the connection to the mounting structure.

The distinction is useful when reviewing quotations: a cylinder mount with a membrane skirt and a welded clamp base are different arrangements. Identify the proposed type and its connection method rather than describing the whole range as non-penetrating.

Consider the equipment being supported

The range includes applications for PV mounting structures, cable trays and inverters. Each needs its own layout and roof assessment. Define the requested equipment package and the relevant mounting positions so that the interface can be reviewed for that use.

Start with the roof information

Provide a roof section, membrane type and thickness, insulation details and proposed array layout. Identify the membrane manufacturer and the supporting construction so that the roof interface can be coordinated with the actual roofing system. Include the site location and project design requirements for the mounting review.

Request a quote with the roof build-up and equipment layout to discuss the appropriate TPO/PVC mounting option.

Get an engineered mounting quote for your project.

Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.

Request a quote