Solar racking sytem is the support and link for whole solar system
Solar panels are installed in different locations, depending on space requirements, proximity to the energy usage point and the availability of solar energy resources.
Solar panel installation points include:
- On the roof of a building, metal sheet roof or concrete
- Top or side of poles firmly planted in the ground
- On the ground and elevated by tilt mounting racks
Regardless of where your solar panels are installed, the goal is to ensure that they remain safe, secure and operational for years to come. 25 years design lifetime normally.
Often during the planning of a solar installation, the placing of the module stand on the roof is not sufficiently examined and the importance of the placement is underestimated.
The fastening system can become the weak link in the chain if the actual loads, such as the weight of the complete solar installation and wind force cannot be absorbed with a certain safety margin. The system must also guarantee a lasting seal between roof penetration and fastener. If this link between solar installation and roof is not chosen correctly, it can lead to expensive problems with the solar roof.
Solaracks design and manufacture solar mounting structure for joining the solar units and the roof. The solar racking system is securely fastened onto the substructure in a quick, easy and reliable way. The direct load transfer into the substructure is very important, in order to permanently and reliably absorb linear expansion due to temperature, wind and snow loads.