Resource
Why a Standing-Seam Clamp’s Pull-Off Capacity Depends on the Roof Profile
A common request from metal-roof EPCs: “just tell me the pull-off rating of your seam clamp.” It is a fair question with an uncomfortable…
Resources
Technical articles, buyer guides, installation guides, material and corrosion references, downloads and warranty terms — written to speed up mounting decisions.
Engineering Library
How to Specify Corrosion Protection for Solar Mounting Systems (C1–CX)
A solar mounting structure is expected to survive 25 years outdoors while carrying a live electrical asset. Get the corrosion specification wrong and it…
Resource
EPDM in Solar Mounting: What a 50-Year Service Life Claim Actually Means
Every clamp, L-foot and sealing washer in a solar mounting system has a few grams of black rubber doing quiet, critical work: separating dissimilar…
Resource
Choosing Roofing Screws for Solar: Coating Class vs Corrosion Environment
The cheapest components in a rooftop solar system are also its most numerous corrosion points. A 100 kW metal-roof install can put over a…
Engineering Library
Why 304 Stainless Fasteners Can Be Slightly Magnetic — and Why That Is Not a Defect
A container of A2-70 stainless bolts arrives, someone touches a magnet to one, it sticks — faintly, but it sticks — and a quality…
Resource
Material Certification — SS304 A2-70 Fasteners to ISO 3506-1 (2025)
Batch quality certificate for SS304 (A2-70) DIN 912 hex socket head cap screws (M8×1.25×25): mechanical properties to ISO 3506-1:2020 — yield strength 584 N/mm²…
Downloads
Corrosion Protection Guide — ISO 12944 / 1461 / 7599 & Fasteners (2026)
23-page engineering reference for specifying corrosion protection on solar mounting structures: aluminium anodizing classes by C1–CX corrosivity category (ISO 7599 / QUALANOD), hot-dip galvanizing…
Resource
Salt Spray 1,000 h — Coated Roofing Screw, No Red Rust (SGS, 2022)
Neutral salt spray test to ASTM B117 (5% NaCl, 35 °C, 1,000 hours) of coated SUS410 hex-washer roofing screws (6.3-10×80) by SGS-CSTC: no visible…
Resource
Pull-Out Test — Self-Tapping Screw ST6.3×80 (SGS, 2021)
Pull-out testing of the ST6.3×80 mm self-tapping screw by SGS-CSTC Xiamen: maximum force 3,130 N in 2.5 mm steel plate and 3,206 N in…
Resource
Compression Test — Punched Aluminum Walkway SR-AWP, 3,101 N (SGS, 2024)
Compression test of the SR-AWP punched (anti-slip) aluminum walkway over a 1,200 mm span by SGS-CSTC Xiamen: maximum force 3,101 N. Report XMIN2312003120ML01, January…
Resource
Compression Test — Aluminum Walkway SR-AWC, 5,599 N (SGS, 2024)
Three-point compression test of the SR-AWC aluminum checker-plate walkway over a 1,000 mm span by SGS-CSTC Xiamen: maximum force 5,599 N. Report XMIN2312003120ML02, January…
Downloads
Compression Test — HDG Steel Grating SR-HWG, 7,317 N (SGS, 2024)
Compression test of the SR-HWG hot-dip galvanized steel walkway grating (3000×350×30 mm) over a 1,500 mm support span by SGS-CSTC Xiamen: maximum force 7,317…
Get an engineered mounting quote for your project.
Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.
