Adjustable tile roof hook

Tile bracket can minimize penetration on tile roof solar installation, tile hooks goes under the tiles and fix to the substructures, usually wooden batten.

Suggest proper grinding and pre-drill screw hole.

Material SS304

Accessories:

M10x25mm bolt, nut, washers

2*6.3x80mm wooden screw

Adjustable tile roof hook solar mounting system

Can also customize tile brackets to specific roof tiles. Please refer to below drawing and inform values.

Dimension drawing of adjustable SS304 tile roof hook with curved arm profile and M10x25mm bolt hardware
Customize to different tiles

TAG:Adjustable SS304 tile roof hook, stainless steel roof hook, stainless steel 304 roof hook, tile roof hook,tile roof attachment, customized tile roof hook, 90deg tile roof hook, curved tile roof hook

Calculation basis: AS/NZS 1170.2 / ASCE 7-22Stamped design & quote: 24 hWarranty: 12 yearsDesign life: 25+ years

Frequently asked questions

How is this tile roof hook adjusted on site?

The bracket position is adjustable and locked with the supplied M10x25mm bolt, nut and washers, then fixed with two 6.3x80mm wooden screws.

Is this hook angled for curved or 90deg tiles?

It is listed under both 90deg and curved tile roof hook tags, so it suits standard angled and curved tile profiles - confirm yours when ordering.

What stainless grade is used for the bracket?

The hook is made from SS304 stainless steel, selected for corrosion resistance on tile roof solar installations.

What should I check before ordering this hook?

Confirm your tile profile, batten type and rail shape, and share the drawing values if you need the bracket customized to a specific tile.

Get an engineered mounting quote for your project.

Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.

Request a quote View RFQ checklists
Request a quote