SR-B1 is an adjustable aluminium mount for one framed module, made for owners who fit balcony solar themselves. Mounting rails bolt to the balcony railing, tilt brackets set the angle with knob and wing nuts, and the module bolts to the module rails on top. Besides railings, it can go on a wall or stand on open ground. The tilt adjusts up to 60°. 6005-T5 anodized aluminium with SUS304 stainless fasteners; wind-load tested per DIN EN 1991: holds 120 to 130 km/h without slipping.

FitsBalcony railings, walls and open ground; one framed module per set
Fixes intoThe railing or wall, with the mounting rails and the bolts and nuts supplied
LimitsThe railing must carry the module and the wind on it. For a drill-free hook-over bracket, see SR-B2

Benefits

  1. Simple enough for an owner to fit: rails on the railing, brackets for the angle, module bolted on top.
  2. Tilt adjusts up to 60°, set by hand with knob and wing nuts.
  3. Anodized aluminium with stainless fasteners, wind-load tested per DIN EN 1991, 12-year warranty.

Compatible sites and modules

  • Balcony railings
  • Walls
  • Open ground
  • Framed modules up to 72-cell size

Components

  • Mounting railAluminium rail bolted to the railing or wall with the bolts and nuts supplied
  • Tilt bracketSets the angle; locked with wing nuts and knob nuts
  • Module railAluminium rail the module bolts to
  • Module fastenersSUS304 module bolts, flat washers and flange nuts

Technical parameters

Balcony Solar Mount SR-B1: indicative parameters. Final values follow project engineering.
ParameterValueBasis
MountingMounting rails bolted to the railing or wall; tilt brackets and module rails on topSolaracks spec
SitesBalcony railings, walls and open groundSolaracks spec
TiltAdjustable up to 60° with knob and wing nutsSolaracks spec
ModuleOne framed module up to 72-cell size, landscape or portrait, bolted through the frame holesSolaracks spec
WindWind-load tested per DIN EN 1991: holds 120 to 130 km/h without slippingSolaracks spec
Material6005-T5 aluminium rails and arms; SUS304 stainless steel bolts, nuts and washersSolaracks spec
FinishAnodized, 15 µm; profiles chamfered and deburredSolaracks spec
Railing checkThe railing and its fixings must carry the module and the wind on it; where in doubt, ask the building owner or a structural engineerProject-specific
Permission and grid rulesRules for balcony solar differ by country and building: landlord or owners' consent, and the inverter and its registration with the grid operatorProject-specific
Warranty12 years on aluminium and stainless parts; anodized finish appearance 5 years (Solaracks Limited Warranty SR-WT-001)Solaracks spec

Material and coating options

ParameterValue
Material6005-T5 aluminium, anodized; SUS304 stainless steel fasteners
Finish / coatingAnodized, 15 µm; profiles chamfered and deburred

Engineering basis

Solaracks, a solar mounting manufacturer in Xiamen, China, since 2012, makes SR-B1 from the same hardware family as the rest of its balcony range: 6005-T5 aluminium rails and arms with SUS304 stainless fasteners, adapted to the railing. Angles are set with multi-hole or pinned locking, so they hold their position. Wind-load tested per DIN EN 1991: holds 120 to 130 km/h without slipping. The railing itself is not part of the test: it must carry the module and the wind on it. Send the railing type and size and the module model, and the layout and quote come back within 24 hours.

  • DIN EN 1991 (wind actions)

How Solaracks runs wind load calculations →

Installation and packing notes

  1. Check the railing: measure the tube size and shape, make sure the railing and its fixings are sound, and ask the landlord or building management first where their consent is needed. Pick a spot with sun and room for the module.
  2. Bolt the mounting rails to the railing with the bolts and nuts supplied; line them up and level them.
  3. Fit the tilt brackets to the mounting rails with the wing nuts and knob nuts and set the angle.
  4. Fit the module rails to the tilt brackets; check that they are parallel and secure.
  5. Place the module on the module rails, line up the frame holes and fix it with the module bolts, flat washers and flange nuts.
  6. Connect the module to the inverter or micro-inverter of your set, following its manual and the local rules, and check every connection. Electrical work beyond a plug-in set by a qualified electrician.

Check the clamps, bolts and pins every few months and after a storm, and re-tighten anything that has loosened. Wipe the aluminium with a damp cloth when you clean the module; in coastal air, rinse it with clean water.

Each set ships pre-assembled, with numbered hardware bags, a packing list and an illustrated manual in German, English, French, Dutch and Italian, so one person can install it. Private-label packaging is available for distributors. Standard sets usually ship in 15 to 20 days; each quote confirms the date.

Packing and installation control →

Downloads

Related systems and guides

Structural design & quote: 24 hWarranty: 12 years

Frequently asked questions

Will it hold in wind?

SR-B1 was wind-load tested per DIN EN 1991 and holds 120 to 130 km/h without slipping when it is fitted as described. On high or exposed balconies, check the railing first and ask us for the layout.

What angle can I set?

Up to 60°, by hand with the knob and wing nuts on the tilt brackets.

Which modules fit?

One framed module up to 72-cell size, landscape or portrait, bolted through the holes in its frame.

Where can it go besides a railing?

On a wall or on open ground, with the same rails and brackets.

Do I need permission?

Rules differ by country and building. In many buildings the landlord or the owners must agree before anything is fitted to a balcony, and the grid operator may need to be told about a plug-in set. Check before you buy.

What warranty do I get?

12 years on the aluminium and stainless parts under Solaracks Limited Warranty SR-WT-001; the anodized finish appearance 5 years.

How fast can I get an SR-B1 quote?

Within 24 hours of receiving the railing type and size, the module model and the number of sets. Standard sets usually ship in 15 to 20 days; each quote confirms the date.

Get an engineered mounting quote for your project.

Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.

Request a quote
×

Request this document

Enter your company and contact details. We review each request and email you a download link once it is approved.

Requested document solaracks limited warranty sr wt 001 rev 2 0 r1.pdf

Close