Hanger bolt mounting system is suitable for coverings made of corrugated fibre cement or Eternit, asbestos, corrugated iron, or trapezoidal sheets. Hanger bolts allow more flexibility with height adjustment.
It is fixed to wooden substructure
Material : Stainless steel 304
Options
M10*200
M10*250
TAG: hanger bolt, quick mount, hanger bolt installation, L foot with hanger bolt, link, mounting system, pitched roof mounting system, stainless steel 304
| Parameter | Value |
|---|---|
| Material | Anodized aluminium 6005-T5, stainless steel 304 |
| Tensile strength (6005-T5) | 260 MPa ultimate, 240 MPa yield |
| Tensile strength (SS304) | 625.55 MPa ultimate, 263.8 MPa yield |
| Anodising | Coating class AA10, higher on request |
| Roof slope | Up to 12° |
| Wind speed | Up to 88 m/s |
| Hanger bolts | M10 × 200 mm or M10 × 250 mm |
| Roof covers | Fibre-cement, Eternit, asbestos, corrugated iron, trapezoidal sheet (timber substructure) |
| Standards | AS/NZS 1170.2:2011, JIS C 8955:2017, ASCE 7-22 |
| Corrosivity | C3 per ISO 9223, higher on request |
Attachments install without penetration where specified, keeping the roof warranty intact.
Site wind speed drives member sizing to AS/NZS 1170.2 / ASCE 7-22, and every design ships stamped - no under-engineered arrays.
Clamp ranges for 30-35 mm frames are documented per SKU - no on-site clamp swaps.
Kitted, labelled, checklist-verified packing - no crane-day standstill over a missing part.
Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.
