CX-grade is the Solaracks fastener set for steel solar ground mounts and carports at sites of corrosion category C4, C5 and CX: grade 8.8 carbon steel bolts with nuts, U-bolts, tie bars and washers, all with a TDC coating. TDC (thermal diffusion coating) is a zinc diffusion, or sherardizing, coating: zinc is diffused into the surface of each part and forms a dense, even layer of 45 µm or more that covers thread crests and flanks. Because the bolts are carbon steel, no stainless steel touches the zinc or ZAM coating of the frame. The set is used on the steel joints of SR-G3, SR-G4, SR-G8, SR-G9, SR-G10, SR-C2 and SR-C3; below C4 the same joints take grade 8.8 hot-dip galvanized bolts. ISO 9223 classifies the site, and the site class sets which bolts the design uses.

FitsSteel solar ground mounts and carports, ZAM or hot-dip galvanized, at sites of corrosion category C4, C5 and CX (ISO 9223)
InterfaceThe bolted joints of the steel frame, to the bolt list on each system drawing
HardwareBolts, nuts, U-bolts, tie bars and washers, all TDC coated; sizes per drawing
MaterialCarbon steel, bolts property class 8.8; TDC zinc thermal-diffusion coating, 45 µm or more
Flange bolts with TDC zinc thermal-diffusion coating, matte grey finish
The TDC layer covers the whole bolt evenly, thread crests and flanks included.
Hex bolts with TDC zinc thermal-diffusion coatingClose-up of TDC coating on bolt threads and flange heads

Technical parameters

CX-Grade TDC Coated Bolts and Nuts: indicative parameters. Final values follow project engineering.
ParameterValueBasis
Bolt gradeProperty class 8.8 carbon steelSolaracks spec
Product formsBolts, nuts, U-bolts, tie bars and washersSolaracks spec
CoatingTDC: zinc thermal-diffusion (sherardizing) coatingSolaracks spec
Coating thickness45 µm or moreSolaracks spec
Coating coverDense, even layer over thread crests and flanksSolaracks spec
Where usedSteel joints of SR-G3, SR-G4, SR-G8, SR-G9, SR-G10, SR-C2 and SR-C3 at corrosion category C4, C5 and CX; below C4 the same joints take grade 8.8 hot-dip galvanized boltsSolaracks spec
Site classFrom the distance to the sea or the ISO 9223 class of the siteProject-specific
Contact with the frameCarbon steel bolts on the steel frame, so no stainless steel touches the zinc or ZAM coatingSolaracks spec
Sizes and lengthsMetric, to the bolt list on each system drawingProject-specific
TorqueM10 44 to 46 N·m and M12 80 to 82 N·m for grade 8.8 bolts on Solaracks steel ground mounts and carports; larger bolts to the values on the project drawingsSolaracks spec
Damaged zincWire-brush and coat with zinc-rich paint of 70% zinc or moreSolaracks spec
WarrantyTDC coating 12 years (Solaracks Limited Warranty SR-WT-001)Solaracks spec

Material and coating options

ParameterValue
MaterialCarbon steel; bolts property class 8.8
Finish / coatingTDC zinc thermal-diffusion (sherardizing) coating, 45 µm or more

Installation and packing notes

  1. Take the bolt sizes, lengths and quantities from the bolt list on the system drawing; at C4 and above every bolt on the steel frame comes from the CX-grade set.
  2. Use the TDC bolt, nut and washer of each joint together, and do not mix stainless steel or uncoated parts into the steel frame.
  3. Tighten with a torque wrench to the values of the system: M10 44 to 46 N·m and M12 80 to 82 N·m for grade 8.8 bolts on Solaracks steel ground mounts and carports; larger bolts to the values on the project drawings.
  4. If a coated part is damaged on site, wire-brush it and coat it with zinc-rich paint of 70% zinc or more.

Inspect the array once a year and after winds above 80% of the design wind speed: re-check bolt torque and touch up any damaged coating with zinc-rich paint.

Bolts, nuts and washers ship boxed by type and size with the frame, each with a packing list and part labels. Standard items usually ship in 15 to 20 days; each quote confirms the date.

Packing and installation control →

Downloads

Used in these systems

Structural design & quote: 24 hWarranty: 12 years

Frequently asked questions

What is TDC?

Thermal diffusion coating: a zinc diffusion, or sherardizing, coating. Zinc is diffused into the surface of the finished bolt, nut or washer, so the layer is even and covers thread crests and flanks.

Does CX-grade mean the bolts are used at CX sites?

Yes. Solaracks uses the set on steel ground mounts and carports at corrosion categories C4, C5 and CX. ISO 9223 classifies the site, and the site class sets which bolts the design uses.

Which bolts are used below C4?

Grade 8.8 carbon steel bolts, hot-dip galvanized, on the same steel joints.

Why carbon steel bolts and not stainless steel on a galvanized or ZAM frame?

So that no stainless steel touches the zinc or ZAM coating of the frame. Stainless bolts on zinc-coated steel are a mix of metals that would have to be assessed for galvanic corrosion, with insulating washers, sealing or drainage.

How thick is the coating?

45 µm or more.

Which bolt grade is it?

Property class 8.8 carbon steel bolts, with nuts, U-bolts, tie bars and washers in the same TDC coating.

Which Solaracks systems use them?

The steel joints of the SR-G3 vertical bifacial mount, the SR-G4 ZAM steel ground mount, the SR-G8 pile-driven mount, the SR-G9 PHC pile mount, the SR-G10 agrivoltaic mount, and the SR-C2 and SR-C3 steel carports, at corrosion category C4, C5 and CX.

What torque do they need?

The torque of the system they are used in: M10 44 to 46 N·m and M12 80 to 82 N·m for grade 8.8 bolts on Solaracks steel ground mounts and carports; larger bolts to the values on the project drawings.

What warranty comes with them?

12 years on the TDC coating, under Solaracks Limited Warranty SR-WT-001.

What should I send for a quote?

The system or structure drawing with its bolt list (sizes, lengths and quantities), the frame coating, the site location and the distance to the sea or the ISO 9223 class.

Get an engineered mounting quote for your project.

Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.

Request a quote
×

Request this document

Enter your company and contact details. We review each request and email you a download link once it is approved.

Requested document Requested document

Close