One side hooks over the top rail; the other is a telescopic leg that extends to set the angle — no tools, no fixed steps. Stepless tilt from 15–30°, locked by a pinned telescopic tube: no creep, no rattle. The rail-agnostic clamp grips round 30–60 mm and square balustrade tubes.

Part of the 2026 balcony series — one engineered hardware family in 6005-T5 aluminium with SUS304 fasteners, adapted to the railing and the yield you need.

Benefits

  1. Stepless 15–30° tilt — the telescopic leg extends to set the exact angle, no tools, no fixed steps.
  2. Pinned telescopic tube locks solid — no creep, no rattle, no sag over time.
  3. Rail-agnostic clamp grips round 30–60 mm and square balustrade tubes; takes 300–800 W modules.

Applications

Balcony railings needing fine angle tuning — round or square tubes, stepless 15–30° tilt.

Compatible roof and site types

  • Round railing pipes Ø 30–60 mm
  • Square balustrade tubes
  • Framed modules 300–800 W

Components

  • Telescopic support leg with locking pins
  • Rail-agnostic U-clamps (round & square)
  • Pre-drilled 6005-T5 rails & arms
  • SUS304 bolts, flange nuts & washers
  • Rubber-lined railing U-clamps
  • Tool-free tilt knobs & locking pins
  • Illustrated manual — DE / EN / FR / NL / IT

Technical parameters

Balcony Telescopic Tilt Mount SR-H5 — indicative parameters. Final values follow project engineering.
ParameterValue
MountingTop hook + telescopic leg
Tilt range15–30°, stepless
Module power300–800 W
Railing fitRound 30–60 mm & square tubes
Angle lockPinned telescopic tube — rattle-free
Balcony footprintLow
Best forFine angle tuning
Warranty12 years, in writing
Design life25+ years
Guide referenceBalcony Series 2026 · Model D

Material and coating options

ParameterValue
Material6005-T5 aluminium frame; SUS304 stainless fasteners
Finish / coatingChamfered, deburred profiles; 15 µm anodised

Engineering basis

One engineered hardware family across the balcony range — 6005-T5 rails and arms adapted per railing geometry; angle hardware uses multi-hole and pinned locking (no slip, no sag). Layout and quote are matched to your wind zone from railing type and panel size.

  • DIN EN 1991 (wind actions) — 120–130 km/h holding test

How Solaracks runs wind load calculations →

Installation and packing notes

1-person installation — ships pre-assembled with numbered hardware bags. Illustrated manual in DE / EN / FR / NL / IT. Set tilt by extending the telescopic leg — no tools, no fixed steps.

Packing and installation control →

Calculation basis: AS/NZS 1170.2 / ASCE 7-22Stamped design & quote: 24 hWarranty: 12 yearsDesign life: 25+ years

Frequently asked questions

How does the tilt work?

One side hooks over the top rail; the telescopic leg extends to set any angle from 15–30° — stepless, no tools, no fixed steps.

Will it rattle or slip?

No — the pinned telescopic tube locks solid: no creep, no rattle, and the angle cannot sag over time.

Which railings does it fit?

The rail-agnostic clamp grips round 30–60 mm pipes and square balustrade tubes, rubber-lined to protect the finish.

Which panels fit?

300–800 W modules — the widest module range in the balcony series.

What warranty do I get?

A 12-year warranty in writing, on a 25+ year design life — the 6005-T5 aluminium frame and SUS304 stainless fasteners carry the service life.

Get an engineered mounting quote for your project.

Share drawings, module layout, site location, wind load, snow load and corrosion environment. Solaracks will recommend the system, material, layout and packing approach.

Request a quote